Load data for 30-30 Ackley Improved + .308 | 130gr | Atomic 29 HP

Recommended Powder(s): Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 130gr \| Atomic 29 HP
Bullet Weight:	130gr \| 8.4g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	<<locked>>
Caliber:	30-30 Ackley Improved load data
Case Length (l3):	2.030" \| 51.6mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	48.6 Grains of Water \| 3.16 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	46412 psi \| 3200 bar
LID:	LID_B12229_C330
Last updated:	2026-02-07

Load data for 70 loads in caliber 30-30 Ackley Improved with .308 | 130gr | Atomic 29 HP bullet and 35 powders such as Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	88%	41292	89%	**80	100%
ADI AR 2219	<<locked>>	91%	41568	90%	**13	96%
Accurate 2015	<<locked>>	96%	40016	86%	**70	98%
[Accurate 2460]*	<<locked>>	95%	41104	89%	**80	93%
Accurate 2495	<<locked>>	97%	31691	68%	**05	96%
[Accurate 2520]*	<<locked>>	96%	34563	74%	**11	92%
Alliant AR-Comp 👍	<<locked>>	97%	36361	78%	**70	99%
Alliant Reloder-10x 👍	<<locked>>	94%	41742	90%	**16	99%
Alliant Reloder-7	<<locked>>	87%	41727	90%	**54	99%
Baschieri & Pellagri 106	<<locked>>	90%	41205	89%	**11	97%
[Hodgdon Benchmark]*	<<locked>>	96%	41191	89%	**28	92%
Hodgdon H322	<<locked>>	97%	41089	89%	**03	96%
Hodgdon H335	<<locked>>	92%	41568	90%	**10	95%
Hodgdon H4198	<<locked>>	87%	41104	89%	**05	96%
[IMR 3031]*	<<locked>>	97%	30922	67%	**43	93%
IMR 4198 👍	<<locked>>	92%	41640	90%	**64	99%
[Lovex D073.4]*	<<locked>>	93%	40770	88%	**64	93%
[Lovex D073.5]*	<<locked>>	95%	41104	89%	**80	93%
Norma 200 👍	<<locked>>	89%	40857	88%	**90	99%
[Norma 202]*	<<locked>>	97%	34766	75%	**88	93%
[ReloadSwiss RS 40]*	<<locked>>	94%	41147	89%	**80	94%
[Rottweil R 901]*	<<locked>>	97%	38609	83%	**34	94%
SNPE Vectan BA6 1/2	<<locked>>	84%	40872	88%	**57	100%
SNPE Vectan SP 10	<<locked>>	91%	41452	89%	**10	95%
[SNPE Vectan Tubal 3000]*	<<locked>>	96%	38087	82%	**65	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	96%	30821	66%	**21	92%
[Somchem S321]*	<<locked>>	96%	40640	88%	**90	92%
Somchem S335	<<locked>>	97%	36956	80%	**72	95%
Vihtavuori N120	<<locked>>	90%	41089	89%	**38	100%
Vihtavuori N130	<<locked>>	96%	40988	88%	**44	99%
Vihtavuori N133	<<locked>>	97%	34867	75%	**33	96%
[Vihtavuori N140]*	<<locked>>	97%	32895	71%	**20	92%
[Vihtavuori N530]*	<<locked>>	97%	41568	90%	**97	92%
[Vihtavuori N540]*	<<locked>>	97%	32605	70%	**33	91%
[Winchester 748]*	<<locked>>	97%	41089	89%	**10	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	33373	72%	**39	100%
[ADI AR 2219]*	<<locked>>	81%	29443	63%	**54	91%
[Accurate 2015]*	<<locked>>	81%	24671	53%	**36	92%
[Accurate 2460]*	<<locked>>	90%	34214	74%	**56	90%
[Accurate 2495]*	<<locked>>	86%	21480	46%	**36	90%
[Accurate 2520]*	<<locked>>	94%	31473	68%	**43	90%
[Alliant AR-Comp]*	<<locked>>	81%	22394	48%	**93	92%
Alliant Reloder-10x	<<locked>>	81%	27456	59%	**21	95%
Alliant Reloder-7	<<locked>>	81%	35259	76%	**36	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	30443	66%	**98	93%
[Hodgdon Benchmark]*	<<locked>>	91%	35824	77%	**29	90%
[Hodgdon H322]*	<<locked>>	85%	28282	61%	**21	91%
[Hodgdon H335]*	<<locked>>	83%	30472	66%	**83	90%
[Hodgdon H4198]*	<<locked>>	81%	33591	72%	**54	93%
[IMR 3031]*	<<locked>>	91%	26136	56%	**08	90%
IMR 4198	<<locked>>	81%	30371	65%	**34	97%
[Lovex D073.4]*	<<locked>>	88%	34374	74%	**43	90%
[Lovex D073.5]*	<<locked>>	90%	34214	74%	**56	90%
Norma 200	<<locked>>	81%	31270	67%	**00	97%
[Norma 202]*	<<locked>>	91%	29457	63%	**67	90%
[ReloadSwiss RS 40]*	<<locked>>	87%	32721	70%	**10	90%
[Rottweil R 901]*	<<locked>>	88%	30052	65%	**51	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	37304	80%	**01	100%
[SNPE Vectan SP 10]*	<<locked>>	81%	29631	64%	**60	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	89%	29965	65%	**98	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	93%	27601	59%	**42	90%
[Somchem S321]*	<<locked>>	93%	36376	78%	**08	90%
[Somchem S335]*	<<locked>>	87%	27137	58%	**52	90%
Vihtavuori N120	<<locked>>	81%	31343	68%	**60	100%
[Vihtavuori N130]*	<<locked>>	81%	26484	57%	**36	94%
[Vihtavuori N133]*	<<locked>>	84%	24004	52%	**64	91%
[Vihtavuori N140]*	<<locked>>	93%	29283	63%	**31	90%
[Vihtavuori N530]*	<<locked>>	93%	36869	79%	**05	90%
[Vihtavuori N540]*	<<locked>>	94%	30153	65%	**77	90%
[Winchester 748]*	<<locked>>	93%	35810	77%	**08	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data